You may have such a pair of shoes in your memory. You will never forget the first day you had it. You lined up in a long line and finally held it in your hand. Its brand-new look seems to radiate light, lines. The beautiful shoe body stays in your mind, and it can only stay in your mind, because you will take him to battle on the concrete floor and dominate the basketball court. After the storm, maybe it is now dirty in the corner of your shoe cabinet. , I don't think of you anymore.
Every pair of shoes deserves to be treated tenderly. Now the editor has integrated the four strongest cleaning tips, so that you can easily clean your sneakers at home without leaving your house, and restore the original face of your love of shoes. Not much to say, get in the car!
Every time I receive a pair of shoes that I have been fond of for a long time, I will start to think about a question, should I wear this shoe or not? If you don't wear it and use all kinds of methods to extend its lifespan, the shoes will lose their value. But if you wear it, it means that it will face a series of aging problems, such as wrinkles on the upper, damaged lining, oxidation of the sole, etc., especially the yellowing of the crystal sole and the pure white midsole is really a problem. Unbearable, a yellow outsole is simply a waste of a pair of shoes. Often at this time, it is not appropriate to wear or lose, and then simply hide the bottom of the bed and re-enter the new style. However, this approach is not economical or practical. It can only increase unnecessary waste. It is better to spend a small amount of money and time. Make old sneakers new!
Therefore, as an elder, it is necessary for the editor to tell you a little "life experience" today:
(It’s time to see the little yellow shoes hidden under the bed!)
Method 1: Remove yellow agent to remove yellow
Introduction of materials needed for yellowing removal: The materials needed for removing yellowing are very simple, only a brush, a pair of disposable gloves, a roll of plastic wrap, a roll of masking paper, a bottle of BIKI yellowing agent, and a pair of yellowing sneakers.
Steps:
1. Clean the sole and dry it:
Clean the soles before removing yellow. You can use a special detergent or household laundry, as long as you can remove the dirt on the soles.
2. De-yellow the soles:
Apply an appropriate amount of yellowing agent to the place where the sole needs to be yellowed, and use a brush to wipe it evenly.
Be careful not to apply it to the sole carbon plate or other areas that do not need to be yellowed, so as to avoid unnecessary fading and damage. You can use masking paper to cover these areas, such as midsoles, etc.It is best to wear gloves during operation to prevent yellowing agent from sticking to fingers and difficult to clean.
3. Carry out the coating treatment
Use plastic wrap to wrap the sole of the shoe tightly, and try not to leave any gaps, so as to prevent the yellow agent from leaking to unwanted parts.
The function of the cling film is to prevent the yellowing agent from volatilizing too fast and to prolong the action time.
4. Rizhao goes to yellow
The role of sunlight is to accelerate the reaction between the yellowing agent and the sole. The duration of sunlight can be long or short, and varies from person to person. You can perform an eight-hour day of sunlight test to check the effect, and then improve the plan. Repeatedly, it has reached completeness. To get rid of yellowing, it should be noted that in high-temperature sunshine, it is best to put an ice pack or wet towel inside the shoes to cool down, so as to avoid the trouble of degumming the soles caused by the high temperature. In addition, it is best to add a moistened paper towel to the carbon plate and cover it to avoid unnecessary damage caused by long-term sunlight.
The key: cleaning, smearing, coating, sunshine.
In addition, the sunlight here does not necessarily need to be sunlight, it can also be ultraviolet lamps, desk lamps, household energy-saving lamps, etc., as long as it can emit ultraviolet light, but the irradiation time is different for different powers. If there are ultraviolet lamps, the most Well, without the possibility of high temperature degumming, it can also speed up the response well.
About the choice of yellowing agent:The editor recommends some suggestions for the JRS to remove yellowing agent:The yellowing agent used in the above tutorial is made by the BIKI brand by the manufacturer of Biaoqi. Because of the mainstream use of the BIKI brand, the effect is really good, so I recommend it here.
Sneakers, for sneakerhead who are avid sneakers, are an exciting work of art. They can save money just to buy a pair of their beloved sneakers and preserve them, and they want to keep their looks forever. But for most people who like sneakers, although they love them, most of them will still be worn under their feet. These long-wear sneakers, if you don’t pay attention to maintenance, often appear oxidized yellowing in the bottom of the paint, etc. The problem of human headaches, although there have always been many tips for nursing care of using kitchen supplies, these are more used in emergency situations and cannot completely solve the problem of worn-out sneakers.
Method 2: horse hair brush
Let's talk about the cleaning of the upper first. The upper can be roughly divided into leather, artificial leather, suede, suede suede, canvas and woven mesh fabrics.
Among them, the best care is to woven shoe uppers, canvas and artificial leather fabrics. You only need to wash with daily detergents, but remember to use a softer horsehair brush to clean the shoe uppers to avoid damage to the shoe uppers. , And use a harder brush to clean the midsole and sole.
Regarding the upper cleaning of woven shoe uppers, if you are using a product such as an artifact of shoe washing, you can put a towel inside the shoe to set the shape and absorb the water during cleaning in time.
The canvas editor has always been violently washed, as long as you pay attention to spreading a layer of paper towels when drying to avoid yellowing of the upper.
Suede suede and other shoe uppers can be treated with a suede brush and a suede wipe. First use the brush to remove dust on the surface from the back to the front, and then use the suede wipe to remove the more stubborn stains. Wipe, and then brush back and forth with a suede brush.
Recommend a personally favorite multifunctional suede brush, which combines three kinds of brushes designed in one to achieve more detailed cleaning. The suede decontamination wipe can be purchased from domestic products at a very cheap price. In case of emergency, you can also use instant shiny shoe sponge instead.
Method 3: shoe sponge
Leather products are generally not washed with water, just wipe and clean the surface. You can use leather decontamination cream and sponge to clean local dirt. In addition, leather decontamination cream can also be used to clean artificial leather.
Let me talk about how I clean the inner lining of sneakers. I usually love sneakers. I have some obsessive-compulsive disorder. I also need to keep the inner lining of white shoes clean at all times. I usually prepare a dry cleaning agent. (Spray), combined with a toothbrush, the inner lining will be cleaned when it is slightly dirty, so keep the inner lining clean all the time.
Method 4: Clean the spray suit
If you are a lazy person, you can take a look at this very interesting cleaning kit, a product produced by BIKI, a sneaker cleaning brand:
Most of the products in this shoe washing suit are similar to other brands, but the design of the exclusive sports laundry bag in the upper right corner is very interesting. This laundry bag is used in combination with the shoe last, and the sneakers can be washed in the washing machine to have a good effect. It destroys the shape and can also remove wrinkles. If you find that various maintenance methods are troublesome, then this cleaning product is worth a try.
Simply show the usage and effect:http://www.cnbiaoqi.com/shoe-shine/biki-quick-shine-bk6660.html
Leather is the most basic and most comfortable upper material, but it is relatively troublesome to maintain. The leather mentioned here is the first layer of leather. As the name suggests, it is made of the first layer of animal leather. The mainstream sneakers of Nike, Adidas, UA and other brands basically have very few heads. Layer leather is used as the upper material in a large area, and only individual joint limited or high-end shoes will be used. For example, D-Rose Black Moon, Li Ning's Way of Wade has a large area of leather (first layer leather). Among them, kangaroo leather is favored by some brands of high-end football shoes.
The slightly better leather care steps are summarized as follows by the editor’s personal experience:
1. First use a horsehair brush (bristle brush) to brush off the floating soil on the surface of the dermis
2. Apply saddle soap with a sponge dipped in water and wipe evenly on the surface of the dermis
(The saddle soap is tested by the editor, it has a good effect on the cleaning effect of the leather, and after taking care of the shoes, it will leave a light fragrance on the shoes)
3. After wiping, put the shoes in a cool and ventilated place to dry
4. Apply maintenance shoe polish evenly on the leather surface.
To learn more about shoe care, please click here: http://www.cnbiaoqi.com/newslist-1
